Hawe Hydraulics

Home > Partners > Hawe Hydraulics

Hawe Hydraulics

Who we are

Hawe Hydraulics is located in München, Germany. You can visit our corporate web site at www.hawehydraulics.com

What we do

From a small Bavarian machine shop to one of the leading hydraulic manufacturers in Europe, HAWE Hydraulics has grown into a world leader in hydraulic solutions.

About the company

It was in 1949, in Munich, Germany, when engineer, Karl Heilmeier, and merchant, Wilhelm Weinlein, founded Heilmeier und Weinlein, Fabrik für Oelhydraulik GmbH & Co. KG. Their vision: To create specialized hydraulic solutions for industrial and mobile motion control problems. With their pioneering spirit and the decision to use steel as their material of choice, they rapidly conquered the marketplace and built a loyal customer following.

Today, our company is known as HAWE (pronounced Hä-vay') Hydraulics and is recognized throughout the world as a quality provider of all-steel-constructed, specialized hydraulic product solutions.

World Headquarters

With over 1000 employees in nine countries, HAWE products are distributed worldwide through more than 25 independent distribution partners.

ETK International Alliance member since 2003

The ETK International Alliance is comprised of select manufacturers, service providers and customers who work closely together to lower the overall cost of doing business and provide industry with the best possible products.

Product listing

View All Hawe Products

Hawe Flow control valve Type S, 2 way controller

Hawe Flow control valve Type S, 3 way controller

Hawe Hydraulic Pump R Series

Hawe Hydraulic Valve Type G Size 1

Hawe Hydraulic Valve Type G Size 2

Hawe Hydraulic Valve Type G Size 22

Hawe Hydraulic Valve Type G Size 3

Hawe Hydraulic Valve Type G Size 4

Hawe Insert Check Valve Type ER

Hawe lifting/lowering valve Type HSZ and HZV

Hawe Pre Fill Valves Type F

Hawe Pressure Reducing Valve ADM

Hawe Pressure Switch Type DG2

Hawe Pressure switch Type DG3

Hawe Pressure Valve DMV

Hawe Pressure Valve Type MV

Hawe Pressure Valve Type SV

Hawe Restrictor valve Type ED

Hawe Restrictor valve Type RD

Hawe Servo Suction/return control valve type N

Hawe Shut off Valve Type DSV

Hawe Throttle Valve RD

Hawe Throttle Valve Type AV

Hawe Throttle Valve Type AVM8

Hawe Throttle valve Type ED

Here is an example of products you can expect from this Partner:

Hawe Hydraulics Valve Type G Size 2

They are designed as spring returned ball seated valves. All valves are G 24 Volt. All other voltages please contact. The valve elements are forced into their respective switching position against the spring force and fluid pressure by various actuation elements via an elbow lever acting on a pin. A strainer insert in the inlet port prevents the entry of coarse contamination. The fluid ducts end as holes with O-ring seals at the ground, bottom surface of the valve body. Pipes may be connected either via customer furnished connection blocks or sub-plates (for individual valves with sub-plates see sect. 5 or for valve banks see D 7302). These valves do not show any leakage in blocked switching position. Reliable shifting is ensured, as these valves are designed as ball seated valves where there is no seizing or sticking in working position under full pressure. The leverage between actuation and valve element ensures low actuation forces and smooth shifting. To avoid interaction, most of these directional control valves are available with check valve inserts and return pressure stops or orifice inserts to limit the inflow of oil. Individual valves with sub-plate, enabling direct pipe connection, may be equipped with a by-pass check valve, a pressure limiting valve, or a rectifier circuit by means of check valves.

Read more...