| ETK Number | Manufacturer | Model | Comment | Image |
S-HYD-HYV-HAW-16431
| Hawe Hydraulics | 2/2-, 3/2-, and 4/3-way directional valves type BVG 1 and BVP 1 | The 2/2-, 3/2-, and 4/3-way directional valves type BVG 1 and BVP 1 are seated cone valves, which are available with solenoid, hydraulic, pneumatic, or manual actuation. All ports are equally pressure resistant, due to the internal pressure compensat |
|
S-HYD-HYV-HAW-16421
| Hawe Hydraulics | 2/2-, 3/2-, and 4/3-way seated valves type NBVP 16 with industrial standard connection pattern confo | The 2/2-, 3/2- and 4/3-way directional seated valves type NBVP 16 are cone seated valves and available with solenoid, hydraulic, pneumatic, or manual actuation. All ports of the 2/2- and 3/2-way directional valves are pressure resistant due to the in |
|
S-HYD-HYV-HAW-16424
| Hawe Hydraulics | 2/2-way directional seated valves type EM and EMP | These 2/2-way directional ball seated valves show zero leakage while in blocked shifting position. These 2/2-way ball seated directional valves are either directly or pilot actuated by a solenoid. |
|
S-HYD-HYV-HAW-16448
| Hawe Hydraulics | 2/2-way seated screw-in valves type EM, EMP | These 2/2-way directional ball seated valves show zero leakage while in blocked shifting position. The actuation solenoid is a wet armature type, i.e. all moving parts of the valve and the solenoid are lubricated by the hydraulic fluid, the coil cavi |
|
S-HYD-HFC-HAW-16446
| Hawe Hydraulics | 2-way Flow control valves type SB, SQ and SJ | These 2-way flow valves (drop rate braking valves), type SB or SQ, are used for flow control purposes with single acting cylinders. They maintain a constant drop rate irrespective of the size of the load |
|
S-HYD-HYP-HAW-16459
| Hawe Hydraulics | Air driven hydraulic pumps type LP | The LP pumps are valve-controlled, two-way plunger pumps on the principle of a
pneumo-hydraulic pressure intensifier. The low-pressure piston with large surface
on the drive-side (air-side) pushes the piston with the smaller surface (hydraulic
sid |
|
S-HYD-HYV-HAW-16416
| Hawe Hydraulics | Check valves type B | Check valves block the flow in one direction whilst permitting free flow in the opposite direction (DIN ISO 1219-1). |
|
S-HYD-HYV-HAW-16447
| Hawe Hydraulics | Check valves type RK/RB, RC, RE, and ER | The check valves type RK/RB, RC, RE, and ER are used to block the flow in one direction and enable free flow in the opposite direction. The check valves type RK/RB are ball seated valves, where the valve element is spring loaded. |
|
S-HYD-HYV-HAW-16422
| Hawe Hydraulics | Clamping modules type SMD 2 and NSMD 2 | This complete control unit is designed as a manifold mounting valve which is suitable for the actuation of hydraulic clamping devices, such as draw-in collets (hollow or massive) at CNC-lathes. A solenoid actuated 4/3- or 4/2-way directional valve an |
|
S-HYD-HPP-HAW-16414
| Hawe Hydraulics | Compact hydraulic power packs type HK, HKF, HKL | Because of the unique integrated fan configuration, the ”ready for
connection” hydraulic power packs are ideal for continuous operation. |
|
S-HYD-HVB-HAW-16433
| Hawe Hydraulics | Directional seated valve bank type BVZP | The valve bank type BVZP consist of a connection block (with ports Pand R), the directional seated valves type VZP installed on sub-plates and connected in parallel plus the end plate. |
|
S-HYD-HYV-HAW-16430
| Hawe Hydraulics | Directional seated valves type BVG, BVE, BVP and NBVP | The directional cone seated valves types BVG, BVE, and BVP are 2/2- and3/2-way directional valves which are available in two sizes. |
|
S-HYD-HYV-HAW-16462
| Hawe Hydraulics | Directional seated valves type NV 8 | Directional seated valves block oil passages leakage free, depending
on working position and flow pattern of the valve. |
|
S-HYD-HYV-HAW-16474
| Hawe Hydraulics | Directional seated valves type VH, VHR and VHP | The directional seated valves types VH, VHR and VHP operate leakage free and are available in two different sizes.They are operated via a hand lever on an eccentric shaft transferring the switching moment to an actuation pin acting on the valve eleme |
|
S-HYD-HYV-HAW-16432
| Hawe Hydraulics | Directional seated valves type VZP | These type VZP use spring loaded balls or cones as valve elements and therefore do not show any leakage. They are manifold mounting and are available in one size only. |
|
S-HYD-HYV-HAW-16434
| Hawe Hydraulics | Directional seated valves type WN and WH | These directional seated valves type WN and WH use spring loaded balls as valve elements and therefore do not show any leakage. They are manifold mounting and are available in four sizes. These valves are very compact as the functional valve parts ar |
|
S-HYD-HYV-HAW-16452
| Hawe Hydraulics | Directional spool valve type HSR(L), HSF, and HSL | |
|
S-HYD-HYV-HAW-16417
| Hawe Hydraulics | Directional spool valve type NSWP 2 | Type NSWP 2 was developed as addition to the other already available directional spool valves type SW 2, SWP 2, SWR 2 acc. to
D 7451, and SWS 2 acc. to D 7951. |
|
S-HYD-HYV-HAW-16461
| Hawe Hydraulics | Directional spool valve type SW, SWP, NSWP, SWR, and SWS | These directional spool valve are available for pipe connection (type SW),manifold mounting (type SWP) or as valve banks (type SWR, SWP). |
|
S-HYD-HYV-HAW-16419
| Hawe Hydraulics | Directional spool valve type SWPN | The valves illustrated here are directly actuated directional spool valves with connection hole pattern conforming DIN 24 340-A6
or A10. The valves type SWPN 2 may be combined as valve banks via the sub-plate system type BA 2 acc. to D 7788. This en |
|
S-HYD-HYV-HAW-16454
| Hawe Hydraulics | Directional spool valves type DL and DLS | The manually actuated directional spool valves type
DL control the direction of movement of single- and double acting consumers. The speed is control via variation of the throttling degree for the pump circulation
(bypass circulation). |
|
S-HYD-HVB-HAW-16435
| Hawe Hydraulics | Directional valve banks type BWN 1 and BWH | The directional valves WN1 or WH1(2 and 3) type (acc. to D 7470A/1) are mounted on sub-plates. These valve banks are laterally
arranged between a connection block and an end plate, all held together and hydraulically connected via a tie rod. The con |
|
S-HYD-HYV-HAW-16427
| Hawe Hydraulics | Drain valve type BR | The drain valve type BR is a valve combination consisting of a 2/2-way directional seated valve and a pre-connected orifice limitingthe flow. All internal function parts of the valve are hardened and ground, with zero leakage when not actuated.
|
|
S-HYD-HYP-HAW-16469
| Hawe Hydraulics | Dual stage pump type RZ | Dual stage pumps type RZ consist of a high pressure section,
i.e. a radial piston pump acc. to D 6010, and a directly mounted, play compensated gear pump forming the low pressure section. The housing of the high pressure pump provides a flange where |
|
S-HYD-HFC-HAW-16471
| Hawe Hydraulics | Flow control valves type SE and SHE with electro-proportional actuation | The proportional flow control valves type SE 2 and SEH 2 (2-way version)as well as SE 3 and SEH 3 (3-way version) are used for pressure independent, step-less remote control of the operating speed of the connected hydraulic consumers.
They enable th |
|
S-HYD-HFC-HAW-16470
| Hawe Hydraulics | Flow control valves type SF, SD, SK and SU | The type S flow control valves are flow valves (DIN ISO 1219-1) and serve for infinite adjustment of the flow into oil-hydraulic, hydrostatic system. Once set, the flow rate is constantly maintained at a tolerance of approx. *3%, regardless of the pr |
|
S-HYD-HFC-HAW-16472
| Hawe Hydraulics | Flow control valves type TQ and TV | Flow dividers type TQ are self-regulating valves, which largely irrespective
of the pressure differentials at the operating connections A and B, divide a flow QC entering at C into two equal output flows, QA and QB. Alternatively, in the opposite di |
|
S-HYD-HHP-HAW-16444
| Hawe Hydraulics | Hand pumps type H, HE, HD and DH | The pumps feature suction and pressure valves with zero leakage. The suction pipes should be kept as short as possible and the oil tanks should for functional reasons be on the same level or higher than suction connections, thus avoiding
that the su |
|
S-HYD-HCB-HAW-16410
| Hawe Hydraulics | Hawe Connection blocks type A, B and C | The HAWE connection blocks provide the ”ready for connection” feature
for compact hydraulic power packs type FP, HC, MP, and HK. Compact
control systems can be created by directly mounting valve banks onto
type A connection blocks (see also “Turn- |
|
S-HYD-HVB-HAW-16409
| Hawe Hydraulics | Hawe Directional spool valve banks type SKP and SKH | Type SKP and SKH directional valve blocks are employed in hydraulic system. They serve to control the flow and thus the direction
of movement of the consumers (hydraulic cylinders and motors). |
|
S-HYD-HSV-HAW-16408
| Hawe Hydraulics | Hawe Directional spool valve type SG and SP | Directional spool valves are generally employed in oil-hydraulic systems. They serve to control the oil flow and thus the direction of
movement of the consumers (hydraulic cylinders and hydraulic motors). These valves are designed for individual ins |
|
S-HYD-HSV-HAW-15329
| Hawe Hydraulics | Hawe Flow control valve Type S, 2 way controller | The type S flow control valves are flow valves (DIN ISO 1219-1) and serve for inifinite adjustment of the flow into oil-hydraulic, hydrostatic system.
|
|
S-HYD-HSV-HAW-15330
| Hawe Hydraulics | Hawe Flow control valve Type S, 3 way controller | The type S flow control valves are flow valves (DIN ISO 1219-1) and serve for inifinite adjustment of the flow into oil-hydraulic, hydrostatic system. |
|
S-HYD-HYP-HAW-15304
| Hawe Hydraulics | Hawe Hydraulic Pump R Series | Hydraulic pumps apply the displacement principle for converting mechanical into hydrostatic energy (DIN ISO 1219-1).
|
|
S-HYD-HYV-HAW-15310
| Hawe Hydraulics | Hawe Hydraulic Valve Type G Size 1 | Directional control valves are generally used for the direct, leakage free control of consumers and as pilot valves for hydraulically actuated valves (depending on the flow pattern).
|
|
S-HYD-HYV-HAW-15311
| Hawe Hydraulics | Hawe Hydraulic Valve Type G Size 2 | Directional control valves are generally used for the direct, leakage free control of consumers and as pilot valves for hydraulically actuated valves (depending on the flow pattern).
|
|
S-HYD-HYV-HAW-15313
| Hawe Hydraulics | Hawe Hydraulic Valve Type G Size 22 | Directional control valves are generally used for the direct, leakage free control of consumers and as pilot valves for hydraulically actuated valves (depending on the flow pattern).
|
|
S-HYD-HYV-HAW-15314
| Hawe Hydraulics | Hawe Hydraulic Valve Type G Size 3 | Directional control valves are generally used for the direct, leakage free control of consumers and as pilot valves for hydraulically actuated valves (depending on the flow pattern). |
|
S-HYD-HYV-HAW-15316
| Hawe Hydraulics | Hawe Hydraulic Valve Type G Size 4 | Directional control valves are generally used for the direct, leakage free control of consumers and as pilot valves for hydraulically actuated valves (depending on the flow pattern).
|
|
S-HYD-HYV-HAW-15317
| Hawe Hydraulics | Hawe Insert Check Valve Type ER | For installation in inlet bores of hydraulic valves or other bodies intended for manifold mounting. |
|
S-HYD-HYV-HAW-15318
| Hawe Hydraulics | Hawe lifting/lowering valve Type HSZ and HZV | This valve combination type HSV or HZV is preferably used for controlling lifting equipment with one or two single acting hydraulic cylinders. |
|
S-HYD-HAC-HAW-16411
| Hawe Hydraulics | Hawe Miniature hydraulic accumulators type AC | The hydraulic miniature accumulators type AC are available in two sizes.
They are used for compensating temperature dependent volume
variations, possible losses due to leakage, as source of pressurized oil
for emergency actuations, or to dampen os |
|
S-HYD-PFV-HAW-15306
| Hawe Hydraulics | Hawe Pre Fill Valves Type F | Prefill Valves Type F are used for: see info |
|
S-HYD-HSV-HAW-15331
| Hawe Hydraulics | Hawe Pressure Reducing Valve ADM | Pressure reducing valves are pressure valves. Their task is to keep the outlet pressure constant, despite a higher and changing inlet pressure (DIN ISO 1219)
|
|
S-HYD-HPS-HAW-15327
| Hawe Hydraulics | Hawe Pressure Switch Type DG2 | Electro-hydraulic pressure switches are devices which close or open electrical contacts when pressurized (DIN ISO 1219-1).
|
|
S-HYD-HPS-HAW-15328
| Hawe Hydraulics | Hawe Pressure switch Type DG3 | Electro-hydraulic pressure switches are devices which close or open electrical contacts when pressurized (DIN ISO 1219-1). |
|
S-HYD-HSV-HAW-15333
| Hawe Hydraulics | Hawe Pressure Valve DMV | Pressure valves primarily influence the pressure in hydraulic installations (DIN ISO 1219-1).
|
|
S-HYD-HSV-HAW-15334
| Hawe Hydraulics | Hawe Pressure Valve Type MV | Pressure valves primarily influence the pressure in hydraulic installations (DIN ISO 1219-1).
|
|
S-HYD-HSV-HAW-15336
| Hawe Hydraulics | Hawe Pressure Valve Type SV | Pressure valves primarily influence the pressure in hydraulic installations (DIN ISO 1219-1). |
|
S-HYD-NRV-HAW-15319
| Hawe Hydraulics | Hawe Restrictor valve Type ED | According to DIN standard 24 300, restrictor valves belong to the flow control group of valves |
|
S-HYD-NRV-HAW-15320
| Hawe Hydraulics | Hawe Restrictor valve Type RD | According to DIN standard 24 300, restrictor valves belong to the flow control group of valves |
|
S-HYD-SUV-HAW-15309
| Hawe Hydraulics | Hawe Servo Suction/return control valve type N | The servo-suction and return control valves belong to the group of shut-off valves (DIN ISO 1219-1). These are generally used to enable the flow of fluid to pass through freely in one direction, but shut it off in the opposite direction. |
|
S-HYD-NRV-HAW-15321
| Hawe Hydraulics | Hawe Shut off Valve Type DSV | Shut-off valves block the flow to the consumers downstream as soon as the set pressure is achieved or exceeded in the consumer line. |
|
S-HYD-NRV-HAW-15325
| Hawe Hydraulics | Hawe Throttle Valve RD | Throttle valves belong to the flow valve group (DIN ISO 1219)
|
|
S-HYD-NRV-HAW-15322
| Hawe Hydraulics | Hawe Throttle Valve Type AV | Type AV are widely used as:
' Please see info
|
|
S-HYD-NRV-HAW-15326
| Hawe Hydraulics | Hawe Throttle Valve Type AVM8 | Conical seated shut-off valves for pipes to pressure chambers in general, to pressure gauges, pressure switch units, control lines, drain I ines, connecting lines etc. |
|
S-HYD-NRV-HAW-15324
| Hawe Hydraulics | Hawe Throttle valve Type ED | Throttle valves belong to the flow valve group (DIN ISO 1219) |
|
S-HYD-HSV-HAW-16412
| Hawe Hydraulics | Hudraulic Non-piloted miniature pressure reducing valves type ADC, ADM, ADME, and AM | The task of pressure reducing valves in a hydraulic circuit is to maintain
a rather constant outlet pressure despite a higher and changing inlet
pressure. These valves are usually used when a secondary circuit has to
be fed with a lower but consta |
|
S-HYD-HYC-HAW-16450
| Hawe Hydraulics | Hydraulic clamps type HSE and HSA | The hydraulic clamping cylinders of types HSE and HSA are single-acting power elements equipped with return springs that are
used in high-pressure hydraulic fixtures and many other hydraulic installations where only a very restricted space is availa |
|
S-HYD-HYV-HAW-16440
| Hawe Hydraulics | Idle circulation valve type CNE 2 | Pressure controlled the 2-way directional valve (idle circulation valve) type CNE can be used for most different control tasks. But its main purpose is to switch one of the two pump circuits joined to a common pipe into idle circulation (low pressure |
|
S-HYD-HYP-HAW-16453
| Hawe Hydraulics | InLine variable displacement axial piston pump type V60N | The fixed displacement axial piston pump type K 60N (bent axis design) is especially suited for demanding, high-duty service. The pump covers the whole displacement range up to 108 cm3/rev. The pump has been developed with modern styling and design t |
|
S-HYD-HSV-HAW-16455
| Hawe Hydraulics | Line rupture safety valve type LB | The line rupture safety valves type LB are check valves. They are available as screw-in valves or with housing for in-line installation. The line rupture safety valves are best installed directly on the actuator(cylinder) which is to be safeguarded. |
|
S-HYD-HYV-HAW-16457
| Hawe Hydraulics | Load holding valves type LHK, LHDV, and LHT | Load holding valves are pressure valves, which act always on the return flow side of double acting consumers. They block the return duct according to their set pressure (setting approx. 15% above the max. load pressure) generating a counter force to |
|
S-HYD-HYV-HAW-16466
| Hawe Hydraulics | Miniature proportional pressure reducing valves type PM | The pressure reducing valves type PM and PMZ are directly actuated valves in all-steel design. They consist of valve body, controller spool and -sleeve, and prop. actuation solenoid. |
|
S-HYD-HYV-HAW-16423
| Hawe Hydraulics | Orifices and restrictor check valves type EB, BE, BC | The orifice inserts type EB are part of the flow valves, whereas the restrictor check valves type BE and BC are a combination of a flow and check valve.They are used to limit the flow during switching operations of directional valves (flow restrictio |
|
S-HYD-HSV-HAW-16443
| Hawe Hydraulics | Piloted pressure limiting valves type DV, AS etc. | The main purpose of pressure valves is to rule the pressure in hydraulic
systems (acc. to DIN ISO 1219-1). Pressure valves type DV, DVE or DF are hydraulically piloted. They consist of a main and a pilot valve. The main valve has a spool ;sliding ra |
|
S-HYD-HSO-HAW-16438
| Hawe Hydraulics | Pressure controlled shut-off valves type DSV and CDSV | These pressure controlled shut-off valves block the flow to consumers located down stream without any leakage as soon as the adjusted pressure is achieved or exceeded in the consumer port B. |
|
S-HYD-HSV-HAW-16439
| Hawe Hydraulics | Pressure limiting valves type CMV and CSV | Pressure valves gover the pressure within a hydraulic system.The types listed are intended for the following purposes: |
|
S-HYD-HSV-HAW-16437
| Hawe Hydraulics | Pressure reducing valves type CDK, DK, and DZ | The task of pressure reducing valves in a hydraulic circuit is to maintain a rather constant outlet pressure despite a higher and changing inlet pressure. |
|
S-HYD-HYV-HAW-16465
| Hawe Hydraulics | Programmable logical valve control type PLVC | The programmable logic valve control type PLVC is intended for the control of complex hydraulic circuits. Movements with various pressure, speed, and acceleration profiles, within predefined ranges, can be controlled and saved. |
|
S-HYD-HYV-HAW-16467
| Hawe Hydraulics | Prop. Directional spool valve type PSL and PSV | The directional spool valves types PSL and PSV serve to control both, the direction of movement and the load-independent, step-less velocity of the hydraulic consumers. In this way several consumers may bemoved simultaneously, independently from each |
|
S-HYD-HSV-HAW-16463
| Hawe Hydraulics | Proportional pressure limiting valves type PMV and PDV | Proportional pressure valves are used for continuous electrical remote control of the pressure in hydraulic systems. |
|
S-HYD-HSV-HAW-16464
| Hawe Hydraulics | Proportional pressure reducing valves type PDM | Type PDM is a indirectly actuated proportional pressure reducing valve, which produces a rather constant pressure (port A) according to the electrical input signal. Additionally it acts also as a safety valve (setting like the one for the reducing fu |
|
S-HYD-HYV-HAW-16449
| Hawe Hydraulics | Releasable check valves type HRP | These valves enable free flow in the one direction but prevent it in reverse direction when the hydraulic release is not actuated
either via an external control line or internally via a directly mounted directional seated valve type G..(W..) 3-0 B 0 |
|
S-HYD-HYV-HAW-16445
| Hawe Hydraulics | Releasable check valves type RH and DRH | The check valves with hydraulic release type RH and DRH are used for blocking one or two consumer lines, as hydraulically actuated drain valves, or idle circulation valves. |
|
S-HYD-HYV-HAW-16429
| Hawe Hydraulics | Screw-in flow valves type BSE, QSE and MSE | These 2-way flow valves (drop rate braking valves), type SB or SQ, are used for flow control purposes with single acting cylinders. |
|
S-HYD-HYV-HAW-16475
| Hawe Hydraulics | Sequence valves with check valve type VR | These pre-load check valves type VR... block the flow in direction V ® F until the
specific opening pressure from approx. 3 to 15 bar is achieved. The pre-load function is not apparent in direction F ® V i.e. free flow |
|
S-HYD-HYV-HAW-16426
| Hawe Hydraulics | Shock and double shock valves Type BMVE and BMVD | The shock valves type BMVE (individual valve) and BMVD (double valve) are pressure valves which protect double acting consumers
(hydraulic motors or hydraulic cylinders) against pressure peaks. They are mainly used as safeguard for additional functi |
|
S-HYD-HSO-HAW-16442
| Hawe Hydraulics | Shut-off valves type DA and EA | These 2/2-way directional seated valves are manually actuated and serve to block (zero leakage) the flow in one or both directions. They are mounted directly in the piping of hydraulic circuits. |
|
S-HYD-HSO-HAW-16415
| Hawe Hydraulics | Shut-off valves, series AVT and AVM | The throttle and shut-off valves types AVT, AV, and CAV, which can be
completely blocked, are available in various sizes and belong to the flow
valve group. Versions AV...E and CAV are screw-in valves. They generate
a pressure drop between inlet a |
|
S-HYD-HYV-HAW-16476
| Hawe Hydraulics | Shuttle valves type WV and WVC | The shuttle valve is a stop valve with two blockable inlets and one outlet. The inlet side with the higher pressure is connected to the outlet and the other inlet is blocked (DIN ISO 1219-1). The function is automatic. |
|
S-HYD-HYV-HAW-16413
| Hawe Hydraulics | Switch-off valves type LV and ALZ | These shut-off valves automatically switch the pump delivery flow into idle circulation as soon as the adjusted pressure is achieved. |
|
S-HYD-HTV-HAW-16441
| Hawe Hydraulics | Throttle valves type Q, QR, QV and FG | Throttles serve to limit the flow within control circuits. The throttle valves detailed here are slot-type throttles, with or without check valve enabling free flow in one and restricted flow in the other direction. The twin sealing of the setting sp |
|
S-HYD-HSO-HAW-16436
| Hawe Hydraulics | Throttle/shut-off valves type AV, AVT and CAV | The throttle and shut-off valves types AVT, AV, and CAV, which can be completely blocked, are available in various sizes and belong to the flow valve group. |
|
S-HYD-HYV-HAW-16460
| Hawe Hydraulics | Two-stage valves type NE | Two stage valves are employed in hydraulic systems fed by two
stage pumps (high pressure / low pressure pumps). They combine
the two pumps to form a common pressure circuit, switch
the low pressure stage to non-pressurized circulation upon
reachi |
|
S-HYD-HYP-HAW-16473
| Hawe Hydraulics | Variable displacement axial piston pumps type V30 | The In-Line variable displacement pump type V30D and V30E work according to the swash plate principle and are intended for open circuit operation in industrial and mobile hydraulics. |
|