ETK Number: N-PRS-EMP-ITA-16095   Manufacturer: Italpresse   Model: PDL         Price: Request a Quote   Comment: Labratory Press   Description: PDL – LABORATORY PRESS weld free ring frames, made with flame cut solid steel plates, calculated with high structural safety factor. the heating platens are obtained from solid steel plates, specially rolled, finely milled and smoothed on the surfaces. Platens are diagonally guided, for a precise flatness control on the panel pressing pistons are CNC ground, polished and chromed. up-stroke movement of the platens complete with all the relevant digital interfaces to set, control, change and save all the pressing cycles MODEL “PDL/50” Platens dimensions mm. 500x500 Loading side mm. 500 Daylight mm. 600 Cylinder run mm. 600 Specific pressure on the 100% platen’s surface Kg/cm² 60 Maximum thrust Ton. 150 Max temperature °C 250 Opening/closing speed mm/sec 75 Installed power Kw 4 MODEL “PDL/60” Platens dimensions mm. 600x600 Loading side mm. 600 Daylight mm. 600 Cylinder run mm. 600 Specific pressure on the 100% platen’s surface Kg/cm² 100 Maximum thrust Ton. 360 Max temperature °C 250 Opening/closing speed mm/sec 75 Installed power Kw 5,5 OPTIONALS: High speed approach variable speed to reach the pressure Computer for the programming of the working cycle Electronic adjustment of the speed during the embossing cycle Embossing electronic control unit, complete with microprocessor “control 10/2”. To set and control the embossing quota. Separate electronic control of the platens temperature by digital instruments Digital manometer to control low and high embossing pressures. Graphic printer to show the temperatures and the pressures complete with transducer and power probe. Digital thermoregulator for the cooling cycle Thermoregulator oir heating/cooling unit mod. TM/OH 1012/45 – 12 KW A vast range of heavy hot/cold hydraulic presses for forming and molding by means of steel or aluminium dies/molds. They are used for numerous applications with various types of material, including solid wood, plywood, MDF, HDF, hardboard, plastic, aluminium, light alloys and composite materials.   These presses by ITALPRESSE are much appreciated in the car industry, where they are used for making briarwood and aluminium inserts, insulation panels for engine and passenger compartments, as well as decks for vans and lorries. Please take a look at the section of this catalogue named ‘AUTOMOTIVE ‘ Special technology has been developed for producing shaped door-skins made of thin MDF (GL/HD). Available in various sizes and with various powers/pressures, with closing from above or below, and electric or thermal oil heating system. They can be configured at will thanks to a large number of optional devices that can be used to adapt the press to your personal requirements.   Control of the pressing functions and the cutting/deformation depths is extremely accurate, with computerized interfaces and colour graphics for plotting and monitoring particular pressure or temperature curves. High manufacturing accuracy is guaranteed by superior quality mechanical components and numerous NC machining processes.    Financing: www.directcapital.com/apply/etkintl

Don't see what you're looking for? Email us today at: sales@etkinternational.com or Call: (704) 819-1541